GT3B 3CH 2.4GHz Radio Set, TX+RX for RTR Upgrade C23325

GT3B 3CH 2.4GHz Radio Set, TX+RX for RTR Upgrade C23325

Key Features: Model Memory, Servos NOR/REV, Steering Trim, Throttle Trim, Dual Rate, End Point, ABS Settings, EXP Settings, Trainer Port (for VRC), CE & FCC certified. Specification: Channels : 3 Channels, Model type : car/boat, RF range : 2.40-2.48GHz, Bandwidth : 500Hz, Band : 160, RF power : less than 20DB, 2.4G system : AFHDS, Code type : GFSK, Sensitivity : 1024, Low voltage warning : yes(less than 9V), DSC port: yes(3.5mm:output:PPM), ST range : 90, TH range : 45(F:30;B:15), Charger port : yes, Power : 12V DC(1.5AA*8), Weight : 328g, ANT length : 26mm, Size : 159 x 99 x 315mm, Color : black, Certificate : CE,FCC

C23325 FlySky GT3B 3 Channel Radio Set manual/binding instructions

Item# C23325 Barcode: 91789008711

Stock: In Stock Sku: C23325
$41.99save $18.00 | 30.00% off $59.99
Add To Wish List

Customer product review

5.0 rating based on 1 review

FLYSKY GT3B Radio System

5.0 rating

I purchased 2 of these radio systems to upgrade my old school glitchy 75mHz radios from yester years. The first model I put it into was my TLT Rockcrawler. The size of the Receiver is very small comparing it to the old school 75mHz crystal type receiver I had been running, and it is able to fit almost anywhere. The small antenna from the receiver is easy to pace on your model where it could be even not seen if you wanted. The setup was fairly easy once I checked out the settings on the radio itself and played with it a bit. I was up and running my truck with the new system in no time, and am very pleased that I do not have to worry about other radios not being on the same frequency due to the 2.4GHZ system. I have purchased a few more of the receivers for putting into some of my other RC vehicles as this can be programmed for multiple different models and switched easily.. Overall, I really like this radio system, and would recommend it to anyone looking to upgrade from the old crystal type systems..

Key Features: Model Memory, Servos NOR/REV, Steering Trim, Throttle Trim, Dual Rate, End Point, ABS Settings, EXP Settings, Trainer Port (for VRC), CE & FCC certified. Specification: Channels : 3 Channels, Model type : car/boat, RF range : 2.40-2.48GHz, Bandwidth : 500Hz, Band : 160, RF power : less than 20DB, 2.4G system : AFHDS, Code type : GFSK, Sensitivity : 1024, Low voltage warning : yes(less than 9V), DSC port: yes(3.5mm:output:PPM), ST range : 90, TH range : 45(F:30;B:15), Charger port : yes, Power : 12V DC(1.5AA*8), Weight : 328g, ANT length : 26mm, Size : 159 x 99 x 315mm, Color : black, Certificate : CE,FCC

C23325 FlySky GT3B 3 Channel Radio Set manual/binding instructions

Item# C23325 Barcode: 91789008711


Installation Notes
Integy products are designed for experienced RC enthusiasts. Unless included with the product itself, most of our products do not include instructions. The purchaser is responsible for any product assembly/disassembly, any set-up and adjustment, and periodic maintenance. If you need help disassembling your stock vehicle, you will need to refer to the instruction manual/exploded parts view of your particular vehicle, as provided by the manufacturer of your vehicle. If you are unable to assemble and/or install a product, please consult your local Integy dealer for assistance.

All products will require some prep out of the package. Some items (shocks, gearboxes, axles, etc.) are assembled for packaging purposes only, and may require standard prep before installation and usage, such as shimming for proper alignment, checking tightness of all components and fasteners, installing your own shock oil, anti-seize, or grease. Please be sure to apply threadlock on all metal-to-metal interfaces prior to installation; do not just install the item out of the package and assume they have been prepped correctly. Check, adjust, and set/reset all new items when taken out of the package.

Wheel and tire sets may be sold partially assembled for packaging purposes only, and require standard wheel/tire prep before installation and usage. All wheels and tires require CA glue (if press-fit style) or separate assembly (if beadlock style) before being used. Wheels and tires are not always pre-glued from the factory (unless specified in the product name or description).

Unless specified, not all products include hardware; if new or different-sized hardware and/or fasteners are included with the upgrade kit, those are meant to replace the factory hardware. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some items may require modification to the vehicle for proper clearance.

Due to factory supply delays beyond our control, certain products may ship with hardware (screws, washers, etc.) that is different from what is originally shown in the website product photos. Any alternates will be compatible hardware that will not affect the functionality of the product.

Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language.

Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed. Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.

  • For more product fitment info and guides, go to Product Instructions
  • Frequently asked product questions can be seen in our FAQ
  • If you have questions about this product, contact us to Get Help

 

Featured Products

  • GT3B 3CH 2.4GHz Radio Set, TX+RX for RTR Upgrade
  • GT3B 3CH 2.4GHz Radio Set, TX+RX for RTR Upgrade C23325

$41.99save $18.00 | 30.00% off $59.99