V2 Edition i10B 4X4 Brushless RTR 1/10 Performance Buggy by INTEGY i10B01-820W

V2 Edition i10B 4X4 Brushless RTR 1/10 Performance Buggy by INTEGY i10B01-820W

OVERVIEW
Jump into the world of 4wd buggy racing with the i10B01 1/10-scale performance buggy. Designed for the sportsman-level driver, we offer this complete package that is brushless-powered for more performance and excitement. Starting with a durable, 3-piece molded chassis with replaceable front bulkhead mount and top deck, the i10B features a center driveshaft with adjustable slipper clutch as standard equipment. Two metal-gear differentials handle the abuse of off-road, and send power through long-reach dogbones to the four wheels. Pin-type tires are pre-mounted and pre-glued from the factory, ready to roll. A full set of ball bearings throughout the drivetrain are standard equipment. Long suspension arms and upper adjustable turnbuckles pair with aluminum bodied oil-filled shocks with threaded preload adjustment and adjustable mounting angles to dampen the bumps and jumps. There are also turnbuckles on the dual bellcrank steering system for toe adjustability.
Hex head countersunk hardware is used throughout. The sleek 4wd buggy body with wing is already precut and prefinished. Upgraded power comes from a pre-installed SPECS S100 RTR Brushless ESC (820w, 2S-3S, sensorless, built-in LiPo cut-off) and SPECS brushless Twin-Turbo motor (10T, 3000Kv sensorless). The pre-installed radio system is also upgraded to a 2.4gHz 3-channel FS-GT3B pistol-grip with digital LCD display, 10-model memory, drop-down steering wheel, and ha matching aluminum cased performance steering servo. To get driving you will need a 2S-3S battery pack, charger, and 8 AA-size batteries for the transmitter.
CHASSIS
Molded double-deck design w/spine and chassis bracing
Molded battery stay
Separate front bulkhead mount
Low profile molded front bumper
All hex hardware
DRIVETRAIN
4WD Center driveshaft
Front/rear gear differentials
Adjustable slipper clutch
Adjustable motor mount
Front/rear steel dogbones and axles
Full ball bearings in drivetrain
SUSPENSION
Long-reach lower suspension arms
Turnbuckle adjustable upper links
Anodized aluminum oil-filled dampers
Threaded damper bodies
Molded front/rear lower suspension blocks
Adjustable camber
Adjustable caster
Adjustable shock angle
Adjustable upper link mounting points
Adjustable rear hub mounting point
STEERING
Dual bellcrank design
Aluminum steering posts
Adjustable front toe in/out
MORE
Pre-installed 2.4gHz FS-GT3B 3-channel pistol grip radio system
Pre-installed SPECS S100 RTR 820w brushless ESC
Pre-installed SPECS Twin-Turbo 3000Kv sensorless brushless motor w/pinion gear
Pre-installed 6003 steering servo
Pre-mounted and pre-glued pin-type tires
Removable Lexan rear wing
SPECIFICATIONS
Length: 16.3-inches (415mm)
Width: 10.03-inches (255mm)
Height: 5.59-inches (142mm)
Wheelbase: 10.82-inches (275mm)
Weight (chassis): 3 lbs. 10.2-oz. (1650g)
To get up and running you will need:
2S-3S LiPo battery pack
LiPo charger
8x AA-size batteries for the transmitter

Item# i10B01-820W
Barcode: 91789008576

Stock: In Stock Sku: i10B01-820W
$269.99

Customer product reviews

5.0 rating based on 2 reviews

Great buggy

5.0 rating

One of the best bang for the buck rigs out there for sure..Very pleased

huge bang for the buck

5.0 rating

If your looking for a buggy that wont drain your wallet this is the one.. I must say this buggy is extremely fast .I did not expect it to have the speed that it has. The brushless motor screams down the road like you wouldnt believe.and the distance is more than you need.only a 1/10 scale so youll loose sight fast. The fly sky transmitter is beautifull with a lcd blue screen.tons of settings you can perform.but I only have one bad thing to say.the shocks stink.they breack easy and the springs come off the mounts easy.so upgrade them as soon as you get it.use HSP aluminum ones .they are perfect.plus cheap around 20 . Alot of HSP parts are compatible with this buggy.pretty much everything.I even installed a electronic smoking exhaust system. I also put in 1/8 aluminum wheels and it looks awesome and it handles perfect.just buy it and trust me youll blow away competition

OVERVIEW
Jump into the world of 4wd buggy racing with the i10B01 1/10-scale performance buggy. Designed for the sportsman-level driver, we offer this complete package that is brushless-powered for more performance and excitement. Starting with a durable, 3-piece molded chassis with replaceable front bulkhead mount and top deck, the i10B features a center driveshaft with adjustable slipper clutch as standard equipment. Two metal-gear differentials handle the abuse of off-road, and send power through long-reach dogbones to the four wheels. Pin-type tires are pre-mounted and pre-glued from the factory, ready to roll. A full set of ball bearings throughout the drivetrain are standard equipment. Long suspension arms and upper adjustable turnbuckles pair with aluminum bodied oil-filled shocks with threaded preload adjustment and adjustable mounting angles to dampen the bumps and jumps. There are also turnbuckles on the dual bellcrank steering system for toe adjustability.
Hex head countersunk hardware is used throughout. The sleek 4wd buggy body with wing is already precut and prefinished. Upgraded power comes from a pre-installed SPECS S100 RTR Brushless ESC (820w, 2S-3S, sensorless, built-in LiPo cut-off) and SPECS brushless Twin-Turbo motor (10T, 3000Kv sensorless). The pre-installed radio system is also upgraded to a 2.4gHz 3-channel FS-GT3B pistol-grip with digital LCD display, 10-model memory, drop-down steering wheel, and ha matching aluminum cased performance steering servo. To get driving you will need a 2S-3S battery pack, charger, and 8 AA-size batteries for the transmitter.
CHASSIS
Molded double-deck design w/spine and chassis bracing
Molded battery stay
Separate front bulkhead mount
Low profile molded front bumper
All hex hardware
DRIVETRAIN
4WD Center driveshaft
Front/rear gear differentials
Adjustable slipper clutch
Adjustable motor mount
Front/rear steel dogbones and axles
Full ball bearings in drivetrain
SUSPENSION
Long-reach lower suspension arms
Turnbuckle adjustable upper links
Anodized aluminum oil-filled dampers
Threaded damper bodies
Molded front/rear lower suspension blocks
Adjustable camber
Adjustable caster
Adjustable shock angle
Adjustable upper link mounting points
Adjustable rear hub mounting point
STEERING
Dual bellcrank design
Aluminum steering posts
Adjustable front toe in/out
MORE
Pre-installed 2.4gHz FS-GT3B 3-channel pistol grip radio system
Pre-installed SPECS S100 RTR 820w brushless ESC
Pre-installed SPECS Twin-Turbo 3000Kv sensorless brushless motor w/pinion gear
Pre-installed 6003 steering servo
Pre-mounted and pre-glued pin-type tires
Removable Lexan rear wing
SPECIFICATIONS
Length: 16.3-inches (415mm)
Width: 10.03-inches (255mm)
Height: 5.59-inches (142mm)
Wheelbase: 10.82-inches (275mm)
Weight (chassis): 3 lbs. 10.2-oz. (1650g)
To get up and running you will need:
2S-3S LiPo battery pack
LiPo charger
8x AA-size batteries for the transmitter

Item# i10B01-820W
Barcode: 91789008576


Please apply threadlock on all metal-to-metal interfaces prior to installation; failure to do so does not qualify for warranty coverage or replacement. Extra hardware and/or permanent modification may be required to install some products, and some products may eliminate OEM features. Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language. Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed.


Integy products are designed for experienced RC enthusiasts; step-by-step instructions are not included for most items. If you do not know how to assemble, install, configure, or use a product, please ask your local hobby dealer for assistance.

Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.

  • For more product fitment info and guides, go here: Product Instructions
  • If you have questions about this product, contact us first by going here: Get Help

You May Also Like

Featured Products

  • V2 Edition i10B 4X4 Brushless RTR 1/10 Performance Buggy by INTEGY
  • V2 Edition i10B 4X4 Brushless RTR 1/10 Performance Buggy by INTEGY i10B01-820W

$269.99