Billet Machined Type II Shock Set (4) for HPI Baja 5B, 5T & 5B2.0 (L=190, 210mm) BAJ083SILVER

Billet Machined Type II Shock Set (4) for HPI Baja 5B, 5T & 5B2.0 (L=190, 210mm) BAJ083SILVER

OVERVIEW
Replace your stock HPI Baja 5B, 5T, or 5B 2.0 rear shocks with a set of our high-performance Billet Machined Type II Shock Set. These upgraded shocks feature functional external reservoirs to increase the dampening capacity of the shocks without making them longer (and heavier). With increased capacity you can tackle tougher obstacles and rougher terrain. They also use dual springs on the rear shocks with different spring rates for more handling improvement.

All of the components on the outside are made from anodized aluminum alloy - threaded shock bodies, alloy top cap, alloy spring retainer and alloy ball end. Molded rubber sleeves protect the shock shafts to keep them sliding smooth and precise. Both the main body and external reservoir use o-ring seals, and both upper and lower shock mounting points use metal pivot balls.

You get four shocks in a package. The extended shock lengths are 190mm for the front and 210mm for the rear (mount to mount). The shocks are available in anodized silver or orange.

Item# BAJ083SILVER
Barcode: 91789008130

Stock: Out Of Stock  w/o ETA Sku: BAJ083SILVER
$109.99
Add To Wish List

OVERVIEW
Replace your stock HPI Baja 5B, 5T, or 5B 2.0 rear shocks with a set of our high-performance Billet Machined Type II Shock Set. These upgraded shocks feature functional external reservoirs to increase the dampening capacity of the shocks without making them longer (and heavier). With increased capacity you can tackle tougher obstacles and rougher terrain. They also use dual springs on the rear shocks with different spring rates for more handling improvement.

All of the components on the outside are made from anodized aluminum alloy - threaded shock bodies, alloy top cap, alloy spring retainer and alloy ball end. Molded rubber sleeves protect the shock shafts to keep them sliding smooth and precise. Both the main body and external reservoir use o-ring seals, and both upper and lower shock mounting points use metal pivot balls.

You get four shocks in a package. The extended shock lengths are 190mm for the front and 210mm for the rear (mount to mount). The shocks are available in anodized silver or orange.

Item# BAJ083SILVER
Barcode: 91789008130


Installation Notes
Integy products are designed for experienced RC enthusiasts. Unless included with the product itself, most of our products do not include instructions. The purchaser is responsible for any product assembly/disassembly, any set-up and adjustment, and periodic maintenance. If you need help disassembling your stock vehicle, you will need to refer to the instruction manual/exploded parts view of your particular vehicle, as provided by the manufacturer of your vehicle. If you are unable to assemble and/or install a product, please consult your local Integy dealer for assistance.

All products will require some prep out of the package. Some items (shocks, gearboxes, axles, etc.) are assembled for packaging purposes only, and may require standard prep before installation and usage, such as shimming for proper alignment, checking tightness of all components and fasteners, installing your own shock oil, anti-seize, or grease. Please be sure to apply threadlock on all metal-to-metal interfaces prior to installation; do not just install the item out of the package and assume they have been prepped correctly. Check, adjust, and set/reset all new items when taken out of the package.

Wheel and tire sets may be sold partially assembled for packaging purposes only, and require standard wheel/tire prep before installation and usage. All wheels and tires require CA glue (if press-fit style) or separate assembly (if beadlock style) before being used. Wheels and tires are not always pre-glued from the factory (unless specified in the product name or description).

Unless specified, not all products include hardware; if new or different-sized hardware and/or fasteners are included with the upgrade kit, those are meant to replace the factory hardware. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some items may require modification to the vehicle for proper clearance.

Due to factory supply delays beyond our control, certain products may ship with hardware (screws, washers, etc.) that is different from what is originally shown in the website product photos. Any alternates will be compatible hardware that will not affect the functionality of the product.

Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language.

Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed. Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.

  • For more product fitment info and guides, go to Product Instructions
  • Frequently asked product questions can be seen in our FAQ
  • If you have questions about this product, contact us to Get Help

 

Featured Products

  • Billet Machined Type II Shock Set (4) for HPI Baja 5B, 5T & 5B2.0 (L=190, 210mm)
  • Billet Machined Type II Shock Set (4) for HPI Baja 5B, 5T & 5B2.0 (L=190, 210mm) BAJ083SILVER

$109.99