Universal Setup Station for Most 1/8 & 1/10 GT, Off-Road, SC & MT C23115

5.0 | 2 reviews | submit yours

Universal Setup Station for Most 1/8 & 1/10 GT, Off-Road, SC & MT C23115

$99.99

OVERVIEW
If you have ever been to a race track you will know that proper chassis setup is critical, and can be the difference between a DNF and a checkered flag. For most 1/10 and 1/8-scale GT, buggy, truggy, and monster truck owners we offer our 30-piece Universal Setup Station System. Crafted from aluminum and anodized in a gunmetal finish, the setup station can measure each corner of your vehicle individually - up to 15-degrees of camber, 30-degrees of caster, and +35/-40-degrees of toe. The measuring plates all ride on ball bearings for smooth movement and precise readings.

Out of the box, the Universal Setup Station System will work with most 1/8-scale buggy or truggy with standard 1/8-scale axles and wheel nuts, such as: Associated RC8/RC8T, SC8; Hobao Hyper Series; HPI/Hot Bodies D8/D8T, Hellfire; Kyosho Inferno Series; Losi 8IGHT/8IGHT-T series; Mugen MBX/MBXT series, OFNA LX One; Tamiya 801x/801xt series, XRAY XB8, 808 series, etc.

The Universal Setup Station comes with two sets of adaptors; the Type-A adaptors are for vehicles with 6mm x M5-threaded axles such as the Traxxas Revo/T-Maxx 2.5/3.3, HPI E-Savage, and Losi LST1. The Type-B adaptors are for the HPI Savage 2.5/4.6/X/XL which uses 8mm x M5-threaded axles with a reverse thread on one side.

For fitment with other vehicles, we offer optional adaptor sets, sold separately :

Type C: 5mm x M4 threaded axles i.e. Stampede, Slash; Blitz, 1/10-scale TC/drift, etc. Part #C23130
Type D: 4mm x M3 threaded axles i.e. Associated RC18B/T; Losi Mini-T, Mini LST, etc. Part# C23131
Type E: 3/16 x 5-40 front and 3/16x8-32 rear axles i.e. Associated SC10, B4, T4, etc. Part #C23132
Type F: 3/16 x 10-32 threaded axles i.e. Losi XXX/XXX-T, MF2, Losi 1/10 truck, etc. Part #C23215
Type G: 6mm x M4 threaded axles i.e. Associated TC5/TC5R, etc. Part # C23216
Type H: 3/16 x 8-32 threaded axles (all four wheels), Part# C23268
Type J: For all Traxxas 1/16 i.e. E-Revo VXL, Slash 4x4 VXL, Rally VXL, etc. Part# C23344

Stock: In Stock Sku: C23115

Customer product reviews

5.0 rating based on 2 reviews

Great tool

5.0 rating

I've used the older Hudy setup station (all plastic/lexan) and the Integy station. Both have their strengths, but I'd have to say the Integy is the better system. The Integy system uses higher quality components, but is much more time consuming to setup and break down. But that additional time yields better results as there is no play or binding with Integy's bearing/bushing approach. I'd give it 5 stars if it were easier to setup and break down, but it is excellent.

Product Review

5.0 rating

Quality and ease of use is what I can say about this station. As its my first one ever to use. It was a breeze. Took me about 20 min after setup to get everything dialed as I watched football. Just remember to adjust, settle suspension. Recheck, then fine tune. A must have to keep your Truck/Buggy ect. tracking straight and getting the most out of your setup. It is a bit pricey. After the first use I feel it was money well spent. I would highly recommend it!!

OVERVIEW
If you have ever been to a race track you will know that proper chassis setup is critical, and can be the difference between a DNF and a checkered flag. For most 1/10 and 1/8-scale GT, buggy, truggy, and monster truck owners we offer our 30-piece Universal Setup Station System. Crafted from aluminum and anodized in a gunmetal finish, the setup station can measure each corner of your vehicle individually - up to 15-degrees of camber, 30-degrees of caster, and +35/-40-degrees of toe. The measuring plates all ride on ball bearings for smooth movement and precise readings.

Out of the box, the Universal Setup Station System will work with most 1/8-scale buggy or truggy with standard 1/8-scale axles and wheel nuts, such as: Associated RC8/RC8T, SC8; Hobao Hyper Series; HPI/Hot Bodies D8/D8T, Hellfire; Kyosho Inferno Series; Losi 8IGHT/8IGHT-T series; Mugen MBX/MBXT series, OFNA LX One; Tamiya 801x/801xt series, XRAY XB8, 808 series, etc.

The Universal Setup Station comes with two sets of adaptors; the Type-A adaptors are for vehicles with 6mm x M5-threaded axles such as the Traxxas Revo/T-Maxx 2.5/3.3, HPI E-Savage, and Losi LST1. The Type-B adaptors are for the HPI Savage 2.5/4.6/X/XL which uses 8mm x M5-threaded axles with a reverse thread on one side.

For fitment with other vehicles, we offer optional adaptor sets, sold separately :

Type C: 5mm x M4 threaded axles i.e. Stampede, Slash; Blitz, 1/10-scale TC/drift, etc. Part #C23130
Type D: 4mm x M3 threaded axles i.e. Associated RC18B/T; Losi Mini-T, Mini LST, etc. Part# C23131
Type E: 3/16 x 5-40 front and 3/16x8-32 rear axles i.e. Associated SC10, B4, T4, etc. Part #C23132
Type F: 3/16 x 10-32 threaded axles i.e. Losi XXX/XXX-T, MF2, Losi 1/10 truck, etc. Part #C23215
Type G: 6mm x M4 threaded axles i.e. Associated TC5/TC5R, etc. Part # C23216
Type H: 3/16 x 8-32 threaded axles (all four wheels), Part# C23268
Type J: For all Traxxas 1/16 i.e. E-Revo VXL, Slash 4x4 VXL, Rally VXL, etc. Part# C23344

You May Also Like

Featured Products