Universal Setup Station for Most 1/8 & 1/10 GT, Off-Road, SC & MT C23115

5.0 | 1 review | submit yours

Universal Setup Station for Most 1/8 & 1/10 GT, Off-Road, SC & MT C23115

$99.99

OVERVIEW
If you have ever been to a race track you will know that proper chassis setup is critical, and can be the difference between a DNF and a checkered flag. For most 1/10 and 1/8-scale GT, buggy, truggy, and monster truck owners we offer our 30-piece Universal Setup Station System. Crafted from aluminum and anodized in a gunmetal finish, the setup station can measure each corner of your vehicle individually - up to 15-degrees of camber, 30-degrees of caster, and +35/-40-degrees of toe. The measuring plates all ride on ball bearings for smooth movement and precise readings.

Out of the box, the Universal Setup Station System will work with most 1/8-scale buggy or truggy with standard 1/8-scale axles and wheel nuts, such as: Associated RC8/RC8T, SC8; Hobao Hyper Series; HPI/Hot Bodies D8/D8T, Hellfire; Kyosho Inferno Series; Losi 8IGHT/8IGHT-T series; Mugen MBX/MBXT series, OFNA LX One; Tamiya 801x/801xt series, XRAY XB8, 808 series, etc.

The Universal Setup Station comes with two sets of adaptors; the Type-A adaptors are for vehicles with 6mm x M5-threaded axles such as the Traxxas Revo/T-Maxx 2.5/3.3, HPI E-Savage, and Losi LST1. The Type-B adaptors are for the HPI Savage 2.5/4.6/X/XL which uses 8mm x M5-threaded axles with a reverse thread on one side.

For fitment with other vehicles, we offer optional adaptor sets, sold separately :

Type C: 5mm x M4 threaded axles i.e. Stampede, Slash; Blitz, 1/10-scale TC/drift, etc. Part #C23130
Type D: 4mm x M3 threaded axles i.e. Associated RC18B/T; Losi Mini-T, Mini LST, etc. Part# C23131
Type E: 3/16 x 5-40 front and 3/16x8-32 rear axles i.e. Associated SC10, B4, T4, etc. Part #C23132
Type F: 3/16 x 10-32 threaded axles i.e. Losi XXX/XXX-T, MF2, Losi 1/10 truck, etc. Part #C23215
Type G: 6mm x M4 threaded axles i.e. Associated TC5/TC5R, etc. Part # C23216
Type H: 3/16 x 8-32 threaded axles (all four wheels), Part# C23268
Type J: For all Traxxas 1/16 i.e. E-Revo VXL, Slash 4x4 VXL, Rally VXL, etc. Part# C23344

Stock: No Stock Until Est. Aug 2019 Sku: C23115

Customer product review

5.0 rating based on 1 review

Product Review

5.0 rating

Quality and ease of use is what I can say about this station. As its my first one ever to use. It was a breeze. Took me about 20 min after setup to get everything dialed as I watched football. Just remember to adjust, settle suspension. Recheck, then fine tune. A must have to keep your Truck/Buggy ect. tracking straight and getting the most out of your setup. It is a bit pricey. After the first use I feel it was money well spent. I would highly recommend it!!

OVERVIEW
If you have ever been to a race track you will know that proper chassis setup is critical, and can be the difference between a DNF and a checkered flag. For most 1/10 and 1/8-scale GT, buggy, truggy, and monster truck owners we offer our 30-piece Universal Setup Station System. Crafted from aluminum and anodized in a gunmetal finish, the setup station can measure each corner of your vehicle individually - up to 15-degrees of camber, 30-degrees of caster, and +35/-40-degrees of toe. The measuring plates all ride on ball bearings for smooth movement and precise readings.

Out of the box, the Universal Setup Station System will work with most 1/8-scale buggy or truggy with standard 1/8-scale axles and wheel nuts, such as: Associated RC8/RC8T, SC8; Hobao Hyper Series; HPI/Hot Bodies D8/D8T, Hellfire; Kyosho Inferno Series; Losi 8IGHT/8IGHT-T series; Mugen MBX/MBXT series, OFNA LX One; Tamiya 801x/801xt series, XRAY XB8, 808 series, etc.

The Universal Setup Station comes with two sets of adaptors; the Type-A adaptors are for vehicles with 6mm x M5-threaded axles such as the Traxxas Revo/T-Maxx 2.5/3.3, HPI E-Savage, and Losi LST1. The Type-B adaptors are for the HPI Savage 2.5/4.6/X/XL which uses 8mm x M5-threaded axles with a reverse thread on one side.

For fitment with other vehicles, we offer optional adaptor sets, sold separately :

Type C: 5mm x M4 threaded axles i.e. Stampede, Slash; Blitz, 1/10-scale TC/drift, etc. Part #C23130
Type D: 4mm x M3 threaded axles i.e. Associated RC18B/T; Losi Mini-T, Mini LST, etc. Part# C23131
Type E: 3/16 x 5-40 front and 3/16x8-32 rear axles i.e. Associated SC10, B4, T4, etc. Part #C23132
Type F: 3/16 x 10-32 threaded axles i.e. Losi XXX/XXX-T, MF2, Losi 1/10 truck, etc. Part #C23215
Type G: 6mm x M4 threaded axles i.e. Associated TC5/TC5R, etc. Part # C23216
Type H: 3/16 x 8-32 threaded axles (all four wheels), Part# C23268
Type J: For all Traxxas 1/16 i.e. E-Revo VXL, Slash 4x4 VXL, Rally VXL, etc. Part# C23344

You May Also Like

Featured Products