Your 1/10-scale off-road buggy, stadium truck, or short course truck needs proper setup to perform at their best. To make sure all of your suspension angles are correct, use our new Professional Setup Station System for Most 1/10 Off-Road Vehicles. Crafted from Billet machined aluminum and anodized in multiple finishes, the setup station can measure each corner of your vehicle individually for camber, caster, and toe angle. The camber plates rotate on ball bearings for smooth movement and precise readings, and mount to your vehicle with the included alloy thumbscrew axle adaptors. When you're done tuning, the setup station breaks down and is stored in the included carry case. The Professional Setup Station System for Most 1/10 Off-Road Vehicles is available in black, green, grey, light blue, orange, purple, or red anodizing.
NOTE: Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. All products require some prep out of the package - some components are assembled for packaging purposes only, so we strongly recommend that you check all metal-to-metal fasteners for tightness, check fitment and adjust if needed, and use liquid threadlock where applicable. Failure to do so is not a warranty-related incident.
Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some Integy-branded items may be only compatible with the vehicle's OEM parts but not with another Integy-branded item due to design language. For multiple-fitment items, some parts may not be used based on application.