For you DIYers out there looking to build your own custom 8 wheel machines, take a look at our Billet Machined 8X8 Axle DIY Conversion Kit. The kit is for 1/10 or 1/14-scale projects, and features all alloy complete axles that measure in at 195mm wide. Two front axles have alloy steering linkages, universal driveshafts, direct drive (spool) metal diffs and alloy knuckles, caster blocks, and hex hubs. the other two straight axles for the rear feature the same all alloy construction and metal gear differentials. All four axles also have an alloy 4-link upper suspension mount. The kit also includes the following: eight 65mm offset ball end suspension links, six 77mm straight ball end suspension links, two 75mm straight ball end suspension links, three 85-105mm telescopic driveshafts, one 55mm-65mm telescopic driveshaft, and various mounting hardware. Finally, the kit is available in black, gunmetal, or silver finishes. NOTE: This is a custom kit for DIY applications, it is not a direct bolt-on for any specific RC vehicle.
NOTE: Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. All products require some prep out of the package - some components are assembled for packaging purposes only, so we strongly recommend that you check all metal-to-metal fasteners for tightness, check fitment and adjust if needed, and use liquid threadlock where applicable. Failure to do so is not a warranty-related incident.
Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some Integy-branded items may be only compatible with the vehicle's OEM parts but not with another Integy-branded item due to design language. For multiple-fitment items, some parts may not be used based on application.