Billet Machined Suspension Set for Traxxas 1/10 T-Maxx/E-Maxx 3903/5/8, 4907/8 C25958GREY

5.0 | 1 review | submit yours

Billet Machined Suspension Set for Traxxas 1/10 T-Maxx/E-Maxx 3903/5/8, 4907/8 C25958GREY

OVERVIEW
Add strength, color, and flash with our Billet Machined Alloy Suspension Set for your Traxxas 1/10-scale E-Maxx (3903). The suspension set includes front and rear upper arms, front and rear lower arms, front and rear shock towers, and hub carriers for all four corners. New pillow ball hardware is included for easy installation. The suspension set is available in blue, green, grey, orange, purple, red, or silver anodized finishes.

NOTE 1: If your chassis did not come with the e-clip style suspension pins, you'll need Traxxas part #4939X to complete the upper/lower arm installation.

NOTE 2: Some E-Maxx models came with a 6x13mm front outer bearing; if your stock bearings are 6x12mm then you'll need to buy 6x13mm bearings to be able to complete the installation.

Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners.

Item# C25958GREY Barcode: 91789021755

Stock: In Stock Sku: C25958GREY
$189.99

Customer product review

5.0 rating based on 1 review

This is my fourth set

5.0 rating

The billet machined suspension set is the single most important hop-up on all my cars and trucks. They give a tremendous look of realisium. I think they out perform any plastic part I have ever installed. They are durable, strong and add great looks to everyone of my builds. I highly recomed them to everyone.

OVERVIEW
Add strength, color, and flash with our Billet Machined Alloy Suspension Set for your Traxxas 1/10-scale E-Maxx (3903). The suspension set includes front and rear upper arms, front and rear lower arms, front and rear shock towers, and hub carriers for all four corners. New pillow ball hardware is included for easy installation. The suspension set is available in blue, green, grey, orange, purple, red, or silver anodized finishes.

NOTE 1: If your chassis did not come with the e-clip style suspension pins, you'll need Traxxas part #4939X to complete the upper/lower arm installation.

NOTE 2: Some E-Maxx models came with a 6x13mm front outer bearing; if your stock bearings are 6x12mm then you'll need to buy 6x13mm bearings to be able to complete the installation.

Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners.

Item# C25958GREY Barcode: 91789021755


Cross Reference List - Compatible with the following RC cars and parts
Brand Traxxas | Part Number 4907 Brand Traxxas | Part Number 3903 Brand Traxxas | Part Number 3905 Brand Traxxas | Part Number 3908 Brand Traxxas | Part Number 4908 Brand Traxxas | Part Number 4909

Please apply threadlock on all metal-to-metal interfaces prior to installation; failure to do so does not qualify for warranty coverage or replacement. Extra hardware and/or permanent modification may be required to install some products, and some products may eliminate OEM features. Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language. Colors shown in product
photos are as close to possible to the actual item; color matching between parts is not guaranteed.


Integy products are designed for experienced RC enthusiasts; step-by-step instructions are not included for most items. If you do not know how to assemble, install, configure, or use a product, please ask your local hobby dealer for assistance.

Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.

  • For more product fitment info and guides, go here: Product Instructions
  • If you have questions about this product, contact us first by going here: Get Help

You May Also Like

Featured Products