Metal Gear Planetary 1:60 Reduction Gearbox for 1/10 Type D90 Scale Crawler C25179

Metal Gear Planetary 1:60 Reduction Gearbox for 1/10 Type D90 Scale Crawler C25179

 

OVERVIEW
We now offer an improved Planetary Reduction Gearbox for owners of our D90 chassis, as well as anyone looking to build their own custom 1/10-scale rig. The new design features the same, solid alloy/steel gearcase but with a bridged mount and separate mounting legs with slots that allow you to adjust the gearbox angle based on your chassis needs. The Planetary Reduction Gearbox is available in black only.

SPECIFICATIONS
Gearbox Housing Diameter: 35mm
Gearbox Housing Length: 40mm
Gearbox Mounting Tab Spacing: 67mmx7mm
Gearbox Output Shaft Diameter: 5mm w/Flat
Gearbox Output Shaft Length: 12mm
11t Pinion Gear Shaft Size: 3mm
Motor Mounting Hole Spacing: 25mm
Reduction Ratio: 1:60

Item# C25179 Barcode: 91789021379

Stock: No Stock Until Est. Nov 2021 Sku: C25179
$49.99

Customer product review

5.0 rating based on 1 review

Top Notch Construction

5.0 rating

This Planetary gear transmission is very well built and very strong. it has an unbelievable reduction rate! If I counted correctly (which I may not of) it equal roughly 72/1! With a 20T motor at full throttle it is screaming, but moving pretty slow. It has so much low end torque, I would break driveshafts if something bound up. If you want it for your 1/14 tamiya style rig, the mounts will slide over the outside of the chassis rails and you just drill and tap some holes. Keep in mind the Transmission itself is just as big as a 550 can motor., so plan accordingly. One thing to keep in mind, it has NO grease, but it is such a simple design, it's easy to grease up. I might have to use this as a recovery winch drive and get a slightly faster Transmission for my rig.

 

OVERVIEW
We now offer an improved Planetary Reduction Gearbox for owners of our D90 chassis, as well as anyone looking to build their own custom 1/10-scale rig. The new design features the same, solid alloy/steel gearcase but with a bridged mount and separate mounting legs with slots that allow you to adjust the gearbox angle based on your chassis needs. The Planetary Reduction Gearbox is available in black only.

SPECIFICATIONS
Gearbox Housing Diameter: 35mm
Gearbox Housing Length: 40mm
Gearbox Mounting Tab Spacing: 67mmx7mm
Gearbox Output Shaft Diameter: 5mm w/Flat
Gearbox Output Shaft Length: 12mm
11t Pinion Gear Shaft Size: 3mm
Motor Mounting Hole Spacing: 25mm
Reduction Ratio: 1:60

Item# C25179 Barcode: 91789021379


Please apply threadlock on all metal-to-metal interfaces prior to installation; failure to do so does not qualify for warranty coverage or replacement. Extra hardware and/or permanent modification may be required to install some products, and some products may eliminate OEM features. Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language. Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed.


Integy products are designed for experienced RC enthusiasts; step-by-step instructions are not included for most items. If you do not know how to assemble, install, configure, or use a product, please ask your local hobby dealer for assistance.

Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.

  • For more product fitment info and guides, go here: Product Instructions
  • If you have questions about this product, contact us first by going here: Get Help

You May Also Like

Featured Products

  • Metal Gear Planetary 1:60 Reduction Gearbox for 1/10 Type D90 Scale Crawler
  • Metal Gear Planetary 1:60 Reduction Gearbox for 1/10 Type D90 Scale Crawler C25179

$49.99