Billet Machined T9 Realistic High Torque Mega Winch for Scale Rock Crawler 1/10 C25697GUN

Billet Machined T9 Realistic High Torque Mega Winch for Scale Rock Crawler 1/10 C25697GUN

OVERVIEW
Get out of off-road trouble with our Billet Machined T9 High Torque Mega Winch. The 1/10-scale sized winch features a high-torque motor with aluminum heatsink, Billet machined alloy case, steel winch cable and hook, and a pre-wired, case-mounted toggle switch. The T9 Mega Winch is available in blue, gunmetal, or red finishes. (Maximum load rating @7.4VDC = 8-lbs. direct power/7-lbs. w/remote control)

NOTE: RC winches are designed to pull, not lift - meaning pulling a vehicle that is rolling freely, as opposed to lifting a vehicle up off the ground. When you pull, a majority of the vehicle weight is being supported by the tires on the ground, and the rolling tires also take load away from the winch. However, when you try to lift a vehicle, the winch is trying to support the entire weight of the vehicle. DO NOT use your winch to lift the vehicle off the ground! This will most likely burn out the winch motor, and is not covered under warranty.
Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners.

Item# C25697GUN
Barcode: 91789020548

Stock: Out Of Stock  and discontinued Sku: C25697GUN
$49.99
Please note This item is currently not available for purchase, please browse the site for another item.

OVERVIEW
Get out of off-road trouble with our Billet Machined T9 High Torque Mega Winch. The 1/10-scale sized winch features a high-torque motor with aluminum heatsink, Billet machined alloy case, steel winch cable and hook, and a pre-wired, case-mounted toggle switch. The T9 Mega Winch is available in blue, gunmetal, or red finishes. (Maximum load rating @7.4VDC = 8-lbs. direct power/7-lbs. w/remote control)

NOTE: RC winches are designed to pull, not lift - meaning pulling a vehicle that is rolling freely, as opposed to lifting a vehicle up off the ground. When you pull, a majority of the vehicle weight is being supported by the tires on the ground, and the rolling tires also take load away from the winch. However, when you try to lift a vehicle, the winch is trying to support the entire weight of the vehicle. DO NOT use your winch to lift the vehicle off the ground! This will most likely burn out the winch motor, and is not covered under warranty.
Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners.

Item# C25697GUN
Barcode: 91789020548


Experienced Installation Required
Integy products are designed for experienced RC enthusiasts. Unless included with the product itself, most of our products do not include instructions. The purchaser is responsible for any product assembly/disassembly, any set-up and adjustment, and periodic maintenance. If you need help disassembling your stock vehicle, you will need to refer to the instruction manual/exploded parts view of your particular vehicle, as provided by the manufacturer of your vehicle. If you are unable to assemble and/or install a product, please consult your local Integy dealer for assistance.

Assembly and Pre-installation Prep
All products will require some prep out of the package. Some items (shocks, gearboxes, axles, etc.) are assembled for packaging purposes only, and may require standard prep before installation and usage, such as shimming for proper alignment, checking tightness of all components and fasteners, installing your own shock oil, anti-seize, threadlock, or grease. Please be sure to apply threadlock on all metal-to-metal interfaces prior to installation; do not just install the item out of the package and assume they have been prepped correctly. Check, adjust, and set/reset all new items when taken out of the package. Some items may need final adjustment after installation.

Wheel and tire sets may be sold partially assembled for packaging purposes only and require standard wheel/tire prep before installation and usage. All wheels and tires require CA glue (if press-fit style) or separate assembly (if beadlock style) before being used. Wheels and tires are not always pre-glued from the factory (unless specified in the product name or description).

A Note About Hardware
Unless specified, not all products include hardware; if new or different-sized hardware and/or fasteners are included with the upgrade kit, those are meant to replace the factory hardware. Extra hardware, shims, or spacers may be required for some installations. Due to factory supply delays beyond our control, certain products may ship with hardware (screws, washers, etc.) that is different from what is originally shown in the website product photos. Any alternates will be compatible hardware that will not affect the functionality of the product.

1st/3rd-party Compatibility
Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language.  Some parts may require permanent modification to the vehicle for fitment and may eliminate certain OEM features. Some items may require modification to the vehicle for proper clearance. Parts are for specified usage only. We do not guarantee compatibility with other aftermarket items.

What does "RTR" or "ARTR" Mean?
When a product is labelled RTR ("Ready To Run") it generally means that the vehicle chassis is assembled, and electronics are installed. You may still need some final items for operation (i.e. transmitter alkaline batteries, main battery pack and charger, paint for the body, etc.). When a product is labelled "ARTR" generally this means the same as "RTR" but without an included radio system and/or radio components. Please refer to the product description for additional details; no additional items are included unless specifically stated in the product description.

Product Photo Accuracy
Products show in photos may be updated at the production level and replaced by updated versions; we will always ship the most recent version to the customer. Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed. 

  • For more product fitment info and guides, go to Product Instructions
  • Frequently asked product questions can be seen in our FAQ
  • If you have questions about this product, contact us to Get Help

 

Featured Products

  • Billet Machined T9 Realistic High Torque Mega Winch for Scale Rock Crawler 1/10
  • Billet Machined T9 Realistic High Torque Mega Winch for Scale Rock Crawler 1/10 C25697GUN

$49.99