Billet Machined T8 Realistic High Torque Mega Winch for Scale Crawler 1/10 Size C25623RED

Billet Machined T8 Realistic High Torque Mega Winch for Scale Crawler 1/10 Size C25623RED

(Maximum load rating @7.4VDC = 9-lbs. direct power/8-lbs. w/remote control)
NOTE: RC winches are designed to pull, not lift - meaning pulling a vehicle that is rolling freely, as opposed to lifting a vehicle up off the ground. When you pull, a majority of the vehicle weight is being supported by the tires on the ground, and the rolling tires also take load away from the winch. However, when you try to lift a vehicle, the winch is trying to support the entire weight of the vehicle. DO NOT use your winch to lift the vehicle off the ground! This will most likely burn out the winch motor, and is not covered under warranty.

Overall length 73mm
Overall width 30mm (including fairhead)
Overall height 35mm (including switch)
Mounting plate dimensions 40mm x 23mm
Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners.

Item# C25623RED Barcode: 91789020197

Stock: In Stock Sku: C25623RED
$49.99
Add To Wish List

(Maximum load rating @7.4VDC = 9-lbs. direct power/8-lbs. w/remote control)
NOTE: RC winches are designed to pull, not lift - meaning pulling a vehicle that is rolling freely, as opposed to lifting a vehicle up off the ground. When you pull, a majority of the vehicle weight is being supported by the tires on the ground, and the rolling tires also take load away from the winch. However, when you try to lift a vehicle, the winch is trying to support the entire weight of the vehicle. DO NOT use your winch to lift the vehicle off the ground! This will most likely burn out the winch motor, and is not covered under warranty.

Overall length 73mm
Overall width 30mm (including fairhead)
Overall height 35mm (including switch)
Mounting plate dimensions 40mm x 23mm
Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners.

Item# C25623RED Barcode: 91789020197


Installation Notes
Integy products are designed for experienced RC enthusiasts. Unless included with the product itself, most of our products do not include instructions. The purchaser is responsible for any product assembly/disassembly, any set-up and adjustment, and periodic maintenance. If you need help disassembling your stock vehicle, you will need to refer to the instruction manual/exploded parts view of your particular vehicle, as provided by the manufacturer of your vehicle. If you are unable to assemble and/or install a product, please consult your local Integy dealer for assistance.

All products will require some prep out of the package. Some items (shocks, gearboxes, axles, etc.) are assembled for packaging purposes only, and may require standard prep before installation and usage, such as shimming for proper alignment, checking tightness of all components and fasteners, installing your own shock oil, anti-seize, or grease. Please be sure to apply threadlock on all metal-to-metal interfaces prior to installation; do not just install the item out of the package and assume they have been prepped correctly. Check, adjust, and set/reset all new items when taken out of the package.

Wheel and tire sets may be sold partially assembled for packaging purposes only, and require standard wheel/tire prep before installation and usage. All wheels and tires require CA glue (if press-fit style) or separate assembly (if beadlock style) before being used. Wheels and tires are not always pre-glued from the factory (unless specified in the product name or description).

Unless specified, not all products include hardware; if new or different-sized hardware and/or fasteners are included with the upgrade kit, those are meant to replace the factory hardware. Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Some items may require modification to the vehicle for proper clearance.

Due to factory supply delays beyond our control, certain products may ship with hardware (screws, washers, etc.) that is different from what is originally shown in the website product photos. Any alternates will be compatible hardware that will not affect the functionality of the product.

Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language.

Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed. Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.

  • For more product fitment info and guides, go to Product Instructions
  • Frequently asked product questions can be seen in our FAQ
  • If you have questions about this product, contact us to Get Help

 

Featured Products

  • Billet Machined T8 Realistic High Torque Mega Winch for Scale Crawler 1/10 Size
  • Billet Machined T8 Realistic High Torque Mega Winch for Scale Crawler 1/10 Size C25623RED

$49.99