Add chassis stiffness and head turning anodized aluminum at the same time to your 1/10 Bandit with our Performance Conversion Kit! The stock molded chassis is replaced by an anodized aluminum lower deck that is milled out in strategic areas to lose dead weight without hindering chassis strength. A carbon fiber plate up front stiffens up the sterring area, and velcro battery straps hold your battery securely in place – no more accidental battery packs ejecting from the vehicle! Finally, the kit uses all countersunk hex head hardware, and is available in 6 different anodized colors. Maximum battery dimensions are 160mm x 46mm x 32mm (LxWxH).
NOTE: Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. All products require some prep out of the package - some components are assembled for packaging purposes only, so we strongly recommend that you check all metal-to-metal fasteners for tightness, check fitment and adjust if needed, and use liquid threadlock where applicable. Failure to do so is not a warranty-related incident.
Extra hardware, shims, or spacers may be required for some installations. Some parts may require permanent modification to the vehicle for fitment, and may eliminate certain OEM features. Items that are different from the OEM part (such as our snow & sand conversions, piggyback shocks, EXT suspension, or extended wheel hubs) may require modification to the vehicle for proper clearance. Some Integy-branded items may be only compatible with the vehicle's OEM parts but not with another Integy-branded item due to design limitations. For multiple-fitment items, some parts may not be used based on application.