OVERVIEW Jump into the world of 4wd buggy racing with the i10B01 1/10-scale performance buggy. Designed for the newcomer to 4WD, we offer this chassis-only pre-built version for those of you who wish to run your own electronics. Starting with a durable, 3-piece molded chassis with replaceable front bulkhead mount and top deck, the i10B features a center driveshaft with adjustable slipper clutch as standard equipment. Two metal-gear differentials handle the abuse of off-road, and send power through long-reach dogbones to the four wheels. Pin-type tires are pre-mounted and pre-glued from the factory, ready to roll. A full set of ball bearings throughout the drivetrain are standard equipment. Long suspension arms and upper adjustable turnbuckles pair with aluminum bodied oil-filled shocks with threaded preload adjustment and adjustable mounting angles to dampen the bumps and jumps. There are also turnbuckles on the dual bellcrank steering system for toe adjustability. Hex head countersunk hardware is used throughout. A sleek 4wd buggy body with wing is already precut and prefinished. CHASSIS Molded double-deck design w/spine and chassis bracing Molded battery stay Separate front bulkhead mount Low profile molded front bumper Removable Lexan rear wing All hex hardware DRIVETRAIN 4WD Center driveshaft Front/rear gear differentials Adjustable slipper clutch Adjustable motor mount Front/rear steel dogbones and axles Full ball bearings in drivetrain SUSPENSION Long-reach lower suspension arms Turnbuckle adjustable upper links Anodized aluminum oil-filled dampers Threaded damper bodies Molded front/rear lower suspension blocks Adjustable camber Adjustable caster Adjustable shock angle Adjustable upper link mounting points Adjustable rear hub mounting point STEERING Dual bellcrank design Aluminum steering posts Adjustable front toe in/out SPECIFICATIONS Length: 16.3-inches (415mm) Width: 10.03-inches (255mm) Height: 5.59-inches (142mm) Wheelbase: 10.82-inches (275mm) Weight: 3 lbs. 10.2-oz. (1650g) To get up and running you will need: Radio system with 1 servo Motor (1/10-scale size, brushless or brushed) ESC (1/10-scale size) 6-cell NiCd/NiMH or 2S LiPo battery pack
Item# C24618 Barcode: 91789015371
Please apply threadlock on all metal-to-metal interfaces prior to installation; failure to do so does not qualify for warranty coverage or replacement. Extra hardware and/or permanent modification may be required to install some products, and some products may eliminate OEM features. Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language. Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed.
Integy products are designed for experienced RC enthusiasts; step-by-step instructions are not included for most items. If you do not know how to assemble, install, configure, or use a product, please ask your local hobby dealer for assistance.
Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.