i10B 4X4 High Performance 1/10 Buggy by INTEGY Less Electronics C24618

5.0 | 1 review | submit yours

i10B 4X4 High Performance 1/10 Buggy by INTEGY Less Electronics C24618

$158.39

OVERVIEW
Jump into the world of 4wd buggy racing with the i10B01 1/10-scale performance buggy. Designed for the newcomer to 4WD, we offer this chassis-only pre-built version for those of you who wish to run your own electronics. Starting with a durable, 3-piece molded chassis with replaceable front bulkhead mount and top deck, the i10B features a center driveshaft with adjustable slipper clutch as standard equipment.

Two metal-gear differentials handle the abuse of off-road, and send power through long-reach dogbones to the four wheels. Pin-type tires are pre-mounted and pre-glued from the factory, ready to roll. A full set of ball bearings throughout the drivetrain are standard equipment. Long suspension arms and upper adjustable turnbuckles pair with aluminum bodied oil-filled shocks with threaded preload adjustment and adjustable mounting angles to dampen the bumps and jumps. There are also turnbuckles on the dual bellcrank steering system for toe adjustability. Hex head countersunk hardware is used throughout. A sleek 4wd buggy body with wing is already precut and prefinished.

CHASSIS
Molded double-deck design w/spine and chassis bracing
Molded battery stay
Separate front bulkhead mount
Low profile molded front bumper
Removable Lexan rear wing
All hex hardware

DRIVETRAIN
4WD Center driveshaft
Front/rear gear differentials
Adjustable slipper clutch
Adjustable motor mount
Front/rear steel dogbones and axles
Full ball bearings in drivetrain

SUSPENSION
Long-reach lower suspension arms
Turnbuckle adjustable upper links
Anodized aluminum oil-filled dampers
Threaded damper bodies
Molded front/rear lower suspension blocks
Adjustable camber
Adjustable caster
Adjustable shock angle
Adjustable upper link mounting points
Adjustable rear hub mounting point

STEERING
Dual bellcrank design
Aluminum steering posts
Adjustable front toe in/out

SPECIFICATIONS
Length: 16.3-inches (415mm)
Width: 10.03-inches (255mm)
Height: 5.59-inches (142mm)
Wheelbase: 10.82-inches (275mm)
Weight: 3 lbs. 10.2-oz. (1650g)

To get up and running you will need:
Radio system with 1 servo
Motor (1/10-scale size, brushless or brushed)
ESC (1/10-scale size)
6-cell NiCd/NiMH or 2S LiPo battery pack

Item# C24618
Barcode: 91789015371

Stock: In Stock Sku: C24618

Customer product review

5.0 rating based on 1 review

Awesomeness

5.0 rating

Most amazing car great price

OVERVIEW
Jump into the world of 4wd buggy racing with the i10B01 1/10-scale performance buggy. Designed for the newcomer to 4WD, we offer this chassis-only pre-built version for those of you who wish to run your own electronics. Starting with a durable, 3-piece molded chassis with replaceable front bulkhead mount and top deck, the i10B features a center driveshaft with adjustable slipper clutch as standard equipment.

Two metal-gear differentials handle the abuse of off-road, and send power through long-reach dogbones to the four wheels. Pin-type tires are pre-mounted and pre-glued from the factory, ready to roll. A full set of ball bearings throughout the drivetrain are standard equipment. Long suspension arms and upper adjustable turnbuckles pair with aluminum bodied oil-filled shocks with threaded preload adjustment and adjustable mounting angles to dampen the bumps and jumps. There are also turnbuckles on the dual bellcrank steering system for toe adjustability. Hex head countersunk hardware is used throughout. A sleek 4wd buggy body with wing is already precut and prefinished.

CHASSIS
Molded double-deck design w/spine and chassis bracing
Molded battery stay
Separate front bulkhead mount
Low profile molded front bumper
Removable Lexan rear wing
All hex hardware

DRIVETRAIN
4WD Center driveshaft
Front/rear gear differentials
Adjustable slipper clutch
Adjustable motor mount
Front/rear steel dogbones and axles
Full ball bearings in drivetrain

SUSPENSION
Long-reach lower suspension arms
Turnbuckle adjustable upper links
Anodized aluminum oil-filled dampers
Threaded damper bodies
Molded front/rear lower suspension blocks
Adjustable camber
Adjustable caster
Adjustable shock angle
Adjustable upper link mounting points
Adjustable rear hub mounting point

STEERING
Dual bellcrank design
Aluminum steering posts
Adjustable front toe in/out

SPECIFICATIONS
Length: 16.3-inches (415mm)
Width: 10.03-inches (255mm)
Height: 5.59-inches (142mm)
Wheelbase: 10.82-inches (275mm)
Weight: 3 lbs. 10.2-oz. (1650g)

To get up and running you will need:
Radio system with 1 servo
Motor (1/10-scale size, brushless or brushed)
ESC (1/10-scale size)
6-cell NiCd/NiMH or 2S LiPo battery pack

Item# C24618
Barcode: 91789015371

You May Also Like

Featured Products