i10MT 4X4 High Performance 1/10 Monster Truck by INTEGY Less Electronics C24617

submit review

i10MT 4X4 High Performance 1/10 Monster Truck by INTEGY Less Electronics C24617

$113.59

OVERVIEW
Whether you are looking to bash in the backyard or break into MT racing, you can start with the i10MT 1/10-scale 4X4 Performance Monster Truck. We offer this chassis-only pre-built version for those of you who wish to run your own electronics. Starting with a durable, 3-piece molded chassis with replaceable front bulkhead mount and top deck, the i10MT features a center driveshaft with adjustable slipper clutch as standard equipment.

Two metal-gear differentials handle the abuse of off-road, and send power through long-reach dogbones to the four wheels. Large multi-surface treaded racing truck tires are pre-mounted and pre-glued from the factory, ready to roll. A full set of ball bearings throughout the drivetrain are standard equipment. Extra-long suspension arms and upper adjustable turnbuckles pair with long-stroke aluminum bodied oil-filled shocks with threaded preload adjustment and adjustable mounting angles to dampen the bumps and jumps. There are also turnbuckles on the dual bellcrank steering system for toe adjustability. Hex head countersunk hardware is used throughout. A sleek racing-style truck body with rear spoiler is already precut and prefinished.

CHASSIS
Molded double-deck design w/spine and chassis bracing
Molded battery stay
Separate front bulkhead mount
Bar-type molded front bumper
Lexan rear spoiler
All hex hardware

DRIVETRAIN
4WD Center driveshaft
Front/rear gear differentials
Adjustable slipper clutch
Adjustable motor mount
Front/rear steel dogbones and axles
Full ball bearings in drivetrain
Multi-surface treaded racing truck tires

SUSPENSION
Extra-long lower suspension arms
Turnbuckle adjustable upper links
Long-stroke anodized aluminum oil-filled dampers
Threaded damper bodies
Molded front/rear lower suspension blocks
Adjustable camber
Adjustable caster
Adjustable shock angle
Adjustable upper link mounting points
Adjustable rear hub mounting point

STEERING
Dual bellcrank design
Aluminum steering posts
Adjustable front toe in/out

SPECIFICATIONS
Length: 16.3-inches (415mm)
Width: 11.29-inches (303mm)
Height: 7.48-inches (190mm)
Wheelbase: 11.81-inches (300mm)
Weight: 3 lbs. 13.7-oz. (1750g)

To get up and running you will need:
Radio system with 1 servo
Motor (1/10-scale size, brushless or brushed)
ESC (1/10-scale size)
6-cell NiCd/NiMH or 2S LiPo battery pack

Item# C24617
Barcode: 91789015370

Stock: No Stock and Discontinued Sku: C24617

Please note This item is currently not available for purchase, please browse the site for another item.

OVERVIEW
Whether you are looking to bash in the backyard or break into MT racing, you can start with the i10MT 1/10-scale 4X4 Performance Monster Truck. We offer this chassis-only pre-built version for those of you who wish to run your own electronics. Starting with a durable, 3-piece molded chassis with replaceable front bulkhead mount and top deck, the i10MT features a center driveshaft with adjustable slipper clutch as standard equipment.

Two metal-gear differentials handle the abuse of off-road, and send power through long-reach dogbones to the four wheels. Large multi-surface treaded racing truck tires are pre-mounted and pre-glued from the factory, ready to roll. A full set of ball bearings throughout the drivetrain are standard equipment. Extra-long suspension arms and upper adjustable turnbuckles pair with long-stroke aluminum bodied oil-filled shocks with threaded preload adjustment and adjustable mounting angles to dampen the bumps and jumps. There are also turnbuckles on the dual bellcrank steering system for toe adjustability. Hex head countersunk hardware is used throughout. A sleek racing-style truck body with rear spoiler is already precut and prefinished.

CHASSIS
Molded double-deck design w/spine and chassis bracing
Molded battery stay
Separate front bulkhead mount
Bar-type molded front bumper
Lexan rear spoiler
All hex hardware

DRIVETRAIN
4WD Center driveshaft
Front/rear gear differentials
Adjustable slipper clutch
Adjustable motor mount
Front/rear steel dogbones and axles
Full ball bearings in drivetrain
Multi-surface treaded racing truck tires

SUSPENSION
Extra-long lower suspension arms
Turnbuckle adjustable upper links
Long-stroke anodized aluminum oil-filled dampers
Threaded damper bodies
Molded front/rear lower suspension blocks
Adjustable camber
Adjustable caster
Adjustable shock angle
Adjustable upper link mounting points
Adjustable rear hub mounting point

STEERING
Dual bellcrank design
Aluminum steering posts
Adjustable front toe in/out

SPECIFICATIONS
Length: 16.3-inches (415mm)
Width: 11.29-inches (303mm)
Height: 7.48-inches (190mm)
Wheelbase: 11.81-inches (300mm)
Weight: 3 lbs. 13.7-oz. (1750g)

To get up and running you will need:
Radio system with 1 servo
Motor (1/10-scale size, brushless or brushed)
ESC (1/10-scale size)
6-cell NiCd/NiMH or 2S LiPo battery pack

Item# C24617
Barcode: 91789015370

You May Also Like

Featured Products