Cooling Fan w/ Alloy Heatsink Enclosure for 44mm O.D. Motor (L=60mm) C24496

Cooling Fan w/ Alloy Heatsink Enclosure for 44mm O.D. Motor (L=60mm) C24496

OVERVIEW
Keep your temperatures in check and your motor running efficient and cool with our heatsink and cooling fan combos. The motor heatsink clips right onto your RC vehicle's motor, and features multiple cooling fins for added heat-dissipating surface area. We have different motor heatsink styles (top mount, side-mount, etc.) and single or dual cooling fan models available in multiple anodized colors.

IMPORTANT FAN VOLTAGE NOTE: All heatsink cooling fans, unless specified otherwise, are designed to be powered by DC voltage only between 5.0V and no more than 6.0V MAXIMUM! If you choose to power our cooling fans with voltage exceeding 6.0V you are doing so at your own risk! Please make sure that your power source (battery pack, receiver, etc.) is able to supply consistent voltage no lower than 5.0V and no higher than 6.0V. If powering from an ESC, check with the ESC manufacturer to make sure if your ESC is capable of providing enough auxiliary power to handle the added load of extra cooling fans; some ESCs that have built-in fans may not be able to reliably power any additional cooling fans.

Item# C24496 Barcode: 91789014908

Stock: In Stock Sku: C24496
$12.99

Customer product review

4.0 rating based on 1 review

I would buy this again

4.0 rating

I have two Graupner 900 motors, driving a large tug boat. The 44-46mm cooling fin and fans work great. I didn't think they made anything for these large motors, until I found Integy !

OVERVIEW
Keep your temperatures in check and your motor running efficient and cool with our heatsink and cooling fan combos. The motor heatsink clips right onto your RC vehicle's motor, and features multiple cooling fins for added heat-dissipating surface area. We have different motor heatsink styles (top mount, side-mount, etc.) and single or dual cooling fan models available in multiple anodized colors.

IMPORTANT FAN VOLTAGE NOTE: All heatsink cooling fans, unless specified otherwise, are designed to be powered by DC voltage only between 5.0V and no more than 6.0V MAXIMUM! If you choose to power our cooling fans with voltage exceeding 6.0V you are doing so at your own risk! Please make sure that your power source (battery pack, receiver, etc.) is able to supply consistent voltage no lower than 5.0V and no higher than 6.0V. If powering from an ESC, check with the ESC manufacturer to make sure if your ESC is capable of providing enough auxiliary power to handle the added load of extra cooling fans; some ESCs that have built-in fans may not be able to reliably power any additional cooling fans.

Item# C24496 Barcode: 91789014908


Please apply threadlock on all metal-to-metal interfaces prior to installation; failure to do so does not qualify for warranty coverage or replacement. Extra hardware and/or permanent modification may be required to install some products, and some products may eliminate OEM features. Certain Integy-branded items replacing OEM parts may not be compatible with another Integy-branded items due to design language. Colors shown in product photos are as close to possible to the actual item; color matching between parts is not guaranteed.


Integy products are designed for experienced RC enthusiasts; step-by-step instructions are not included for most items. If you do not know how to assemble, install, configure, or use a product, please ask your local hobby dealer for assistance.

Parts are for specified usage only. We do not guarantee product compatibility with other aftermarket branded products.

  • For more product fitment info and guides, go here: Product Instructions
  • If you have questions about this product, contact us first by going here: Get Help

You May Also Like

Featured Products

  • Cooling Fan w/ Alloy Heatsink Enclosure for 44mm O.D. Motor (L=60mm)
  • Cooling Fan w/ Alloy Heatsink Enclosure for 44mm O.D. Motor (L=60mm) C24496

$12.99