Billet Machined Steering Bell Crank Set for Hyper 10SC T8263SILVER

4.5 | 1 review | submit yours

Billet Machined Steering Bell Crank Set for Hyper 10SC T8263SILVER

$24.29

OVERVIEW

Add some flashy looks to your ride and upgrade performance and durability at the same time with our Alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an anodized finish in multiple colors to help match your color scheme.

NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only.

Item# T8263SILVER
Barcode: 91789010752

Stock: In Stock Sku: T8263SILVER

Customer product review

4.5 rating based on 1 review

Bullet proof steering

4.5 rating

If you have a Hyper 10SC or 10TT or Mini ST, and you tend to break the steering arm of your steering rack, this aluminum steering servo-saver/bell-crank will solve that problem. Combined with the aluminum steering knuckles, and of course, a decent bumper setup, your front end is dang near bullet proof. The suspension arms become the sacrificial parts. (You have to have something that will break, otherwise, more expensive, hard-to-get-to parts get broken) That said, I took a half star off, only because 1) The design requires you keep an eye on functionality, which is not really Integy's fault, it's jut the way HoBao designed it. You have to remove it and clean it, and even polish the center aluminum center pivot post with 1200 grit sand paper if you run in dusty conditions, and 2) You can't get replacement nylon parts that wear over a number of years. Otherwise, I cannot complain about "Integy aluminum". I use it on BOTH my cars.

OVERVIEW

Add some flashy looks to your ride and upgrade performance and durability at the same time with our Alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an anodized finish in multiple colors to help match your color scheme.

NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only.

Item# T8263SILVER
Barcode: 91789010752

You May Also Like

Featured Products