i10T High Performance 1/10 Truck 2WD Less Electronics i10T-NE

submit review

i10T High Performance 1/10 Truck 2WD Less Electronics i10T-NE

OVERVIEW

Want a simple, fun, off-road truck that's just at home in your backyard as it is crushing cars? Our i10T 2Wd monster truck is ready to go! Designed to emulate the look and feel of the loud and powerful stadium monster trucks and car crushers, this 2WD machine is available in a complete package that is ready to run and fun to drive. The i10T starts with a durable, molded tub chassis with removable front and rear bulkheads. The chassis has high ground clearance for all terrain capability. A simple but race-proven 3-gear transmission drives the rear wheels through a durable gear differential. An adjustable slipper clutch is standard equipment, as are steel long-reach rear dogbones and axles. All-terrain monster truck tires are pre-mounted and pre-glued from the factory, ready to roll. You will also find a set of ball bearings throughout the drivetrain. Finally, there's a heavy duty adjustable rear wheelie bar that will keep you on two wheels when pulling high powered wheelies!

Long suspension arms and upper adjustable turnbuckles pair with oil-filled shocks with threaded preload adjustment and adjustable mounting angles to handle the bumps and jumps. There are also turnbuckles for toe adjustability on the dual bellcrank steering system. The front chassis brace doubles to protect the steering system from damage, while the rear chassis brace lets the i10T pop over higher obstacles.

The stadium monster truck body is already precut and prefinished, and you'll also find a pair of LED flood lights mounted to the front bumper. This 'roller' version does not include electronics; it requires a 2-channel radio system, ESC, motor, battery, and servo of your choice.

 

CHASSIS
High-clearance molded tub design
Adjustable molded battery stay
Impact absorbing front bumper
Bumper-mounted LED lights 

DRIVETRAIN
Racing 3-gear transmission
Rear gear differential
Adjustable slipper clutch
Molded gear cover
Adjustable motor mount
Rear steel dogbones and axles
Full ball bearings in drivetrain
Monster truck dish-type wheels
Pre-mounted and pre-glued monster truck tires 

SUSPENSION
Long-reach lower suspension arms
Turnbuckle adjustable upper links
Oil-filled dampers
Threaded damper bodies
Front metal suspension brace
Adjustable camber
Adjustable shock angle
Adjustable upper link mounting points
Adjustable rear wheelie bar

STEERING
Dual bellcrank design
Built-in servo saver
Adjustable front toe in/out

MORE
Pre-painted stadium monster truck body

SPECIFICATIONS
Length (not including wheelie bar): 420mm (16.5-inches)
Width: 320mm (12.6-inches)
Height: 236mm (9.3-inches)
Wheelbase: 285mm (11.2-inches)
Weight (RTR, no battery): 1905g (4 lbs. 3.2-oz.)

To get up and running you will need:
2-channel radio system
ESC and motor
Steering servo
6-cell NiCd/NiMH or 2S-3S LiPo battery pack

Item# i10T-NE
Barcode: 917890017743

Stock: In Stock Sku: i10T-NE
$120.89

OVERVIEW

Want a simple, fun, off-road truck that's just at home in your backyard as it is crushing cars? Our i10T 2Wd monster truck is ready to go! Designed to emulate the look and feel of the loud and powerful stadium monster trucks and car crushers, this 2WD machine is available in a complete package that is ready to run and fun to drive. The i10T starts with a durable, molded tub chassis with removable front and rear bulkheads. The chassis has high ground clearance for all terrain capability. A simple but race-proven 3-gear transmission drives the rear wheels through a durable gear differential. An adjustable slipper clutch is standard equipment, as are steel long-reach rear dogbones and axles. All-terrain monster truck tires are pre-mounted and pre-glued from the factory, ready to roll. You will also find a set of ball bearings throughout the drivetrain. Finally, there's a heavy duty adjustable rear wheelie bar that will keep you on two wheels when pulling high powered wheelies!

Long suspension arms and upper adjustable turnbuckles pair with oil-filled shocks with threaded preload adjustment and adjustable mounting angles to handle the bumps and jumps. There are also turnbuckles for toe adjustability on the dual bellcrank steering system. The front chassis brace doubles to protect the steering system from damage, while the rear chassis brace lets the i10T pop over higher obstacles.

The stadium monster truck body is already precut and prefinished, and you'll also find a pair of LED flood lights mounted to the front bumper. This 'roller' version does not include electronics; it requires a 2-channel radio system, ESC, motor, battery, and servo of your choice.

 

CHASSIS
High-clearance molded tub design
Adjustable molded battery stay
Impact absorbing front bumper
Bumper-mounted LED lights 

DRIVETRAIN
Racing 3-gear transmission
Rear gear differential
Adjustable slipper clutch
Molded gear cover
Adjustable motor mount
Rear steel dogbones and axles
Full ball bearings in drivetrain
Monster truck dish-type wheels
Pre-mounted and pre-glued monster truck tires 

SUSPENSION
Long-reach lower suspension arms
Turnbuckle adjustable upper links
Oil-filled dampers
Threaded damper bodies
Front metal suspension brace
Adjustable camber
Adjustable shock angle
Adjustable upper link mounting points
Adjustable rear wheelie bar

STEERING
Dual bellcrank design
Built-in servo saver
Adjustable front toe in/out

MORE
Pre-painted stadium monster truck body

SPECIFICATIONS
Length (not including wheelie bar): 420mm (16.5-inches)
Width: 320mm (12.6-inches)
Height: 236mm (9.3-inches)
Wheelbase: 285mm (11.2-inches)
Weight (RTR, no battery): 1905g (4 lbs. 3.2-oz.)

To get up and running you will need:
2-channel radio system
ESC and motor
Steering servo
6-cell NiCd/NiMH or 2S-3S LiPo battery pack

Item# i10T-NE
Barcode: 917890017743


You May Also Like

Featured Products