Brushless RTR C23475 V2 Type Full Hop-Up 1/10 4WD Shaft Drive Touring Car C24551BLUE

5.0 | 1 review | submit yours

Brushless RTR C23475 V2 Type Full Hop-Up 1/10 4WD Shaft Drive Touring Car C24551BLUE

$296.99

OVERVIEW
Hit the race track with a fully-modified shaft-driven touring car that is ready to take trophies. V2 features a host of aluminum parts including aluminum upper and lower arms for added suspension stiffness - good for high traction situations such as permanent race tracks or carpet tracks.

This RTR version features an FS-GT2B 2.4-gHz 3-channel radio system (w/included LiPo transmitter battery pack) and servo preinstalled. Power is provided by a SPECS sensorless brushless system. The 11.5-turn motor is controlled by an S10B RTR brushless ESC that features a built-in cooling fan and is capable of running 2-3S LiPo packs.

The carbon fiber double-deck chassis accepts NiCd/NiMH/LiPo batteries, and features motor cooling vents. A lightweight aluminum center driveshaft, aluminum differential outputs and dogbones add toughness, while the all aluminum steering and full ball bearings throughout the chassis reduce resistance for more speed.Oil-filled, threaded aluminum shock bodies allow you to fine tune ride height and spring preload. All of these features are optional on other brand chassis; you will spend more than twice the cost just to bring their chassis up to the spec of the V2!

Racing slick tires with molded inserts and aero dish wheels are included, as is a pre-finished body, available in blue or black. Just glue the tires, install a battery pack and get racing!

ELECTRONICS
FS-GT2B 2.4-gHz 3-channel radio system
LiPo radio battery pack, radio grip and USB interface cable included
SPECS S10B RTR 2-3S LiPo brushless ESC with cooling fan
SPECS 11.5T sensorless brushless motor
6009 Aluminum-cased steering servo w/metal output gear

CHASSIS
Carbon fiber double-deck
Carbon fiber battery stay
Carbon fiber front/rear bumper braces
High-density front/rear foam bumpers
All hex hardware

DRIVETRAIN
Front/rear gear differential
Anodized aluminum adjustable motor plate
Anodized aluminum center driveshaft
Anodized aluminum front/rear driveshaft output cups
Anodized aluminum front/rear differential output cups
Anodized aluminum front/rear dogbones
Anodized aluminum front/rear axles
Anodized aluminum front/rear wheel hexes
Anodized aluminum front/rear axle locknuts
Full ball bearings in drivetrain
24T/60Tpinion/spur

SUSPENSION
Carbon fiber front/rear shock towers
Anodized aluminum upper and lower suspension arms
Anodized aluminum oil-filled dampers
Threaded damper bodies
Anodized aluminum front/rear upper suspension mounts
Anodized aluminum front upper/lower suspension pivots
Adjustable front/rear shock angle

STEERING
Anodized aluminum steering arms
Anodized aluminum steering center link
Anodized aluminum steering/top deck posts
Anodized aluminum servo mounts
Adjustable Ackermann, front toe in/out
Full ball bearings in steering system

MORE
Anodized aluminum front/rear body mounts
Aluminum threaded antenna mount
Racing slick tires with molded tire inserts
Aero-dish wheels
Pre-finished body, ready to race

To get up and running you will need:
6-cell NiCd/NiMH or 2S LiPo battery pack

Item# C24551BLUE
Barcode: 91789015369

Stock: Low Stock Sku: C24551BLUE

Customer product review

5.0 rating based on 1 review

Too much speed and not at such a high price!!

5.0 rating

I would like to get more of these if I could. This car has amazing speed and a load of torque like the Ram 3500!! With the best match of electronics, this car has no words. Also with the lightweight aluminum parts, this car takes off amazingly, like a Porsche 959!!

OVERVIEW
Hit the race track with a fully-modified shaft-driven touring car that is ready to take trophies. V2 features a host of aluminum parts including aluminum upper and lower arms for added suspension stiffness - good for high traction situations such as permanent race tracks or carpet tracks.

This RTR version features an FS-GT2B 2.4-gHz 3-channel radio system (w/included LiPo transmitter battery pack) and servo preinstalled. Power is provided by a SPECS sensorless brushless system. The 11.5-turn motor is controlled by an S10B RTR brushless ESC that features a built-in cooling fan and is capable of running 2-3S LiPo packs.

The carbon fiber double-deck chassis accepts NiCd/NiMH/LiPo batteries, and features motor cooling vents. A lightweight aluminum center driveshaft, aluminum differential outputs and dogbones add toughness, while the all aluminum steering and full ball bearings throughout the chassis reduce resistance for more speed.Oil-filled, threaded aluminum shock bodies allow you to fine tune ride height and spring preload. All of these features are optional on other brand chassis; you will spend more than twice the cost just to bring their chassis up to the spec of the V2!

Racing slick tires with molded inserts and aero dish wheels are included, as is a pre-finished body, available in blue or black. Just glue the tires, install a battery pack and get racing!

ELECTRONICS
FS-GT2B 2.4-gHz 3-channel radio system
LiPo radio battery pack, radio grip and USB interface cable included
SPECS S10B RTR 2-3S LiPo brushless ESC with cooling fan
SPECS 11.5T sensorless brushless motor
6009 Aluminum-cased steering servo w/metal output gear

CHASSIS
Carbon fiber double-deck
Carbon fiber battery stay
Carbon fiber front/rear bumper braces
High-density front/rear foam bumpers
All hex hardware

DRIVETRAIN
Front/rear gear differential
Anodized aluminum adjustable motor plate
Anodized aluminum center driveshaft
Anodized aluminum front/rear driveshaft output cups
Anodized aluminum front/rear differential output cups
Anodized aluminum front/rear dogbones
Anodized aluminum front/rear axles
Anodized aluminum front/rear wheel hexes
Anodized aluminum front/rear axle locknuts
Full ball bearings in drivetrain
24T/60Tpinion/spur

SUSPENSION
Carbon fiber front/rear shock towers
Anodized aluminum upper and lower suspension arms
Anodized aluminum oil-filled dampers
Threaded damper bodies
Anodized aluminum front/rear upper suspension mounts
Anodized aluminum front upper/lower suspension pivots
Adjustable front/rear shock angle

STEERING
Anodized aluminum steering arms
Anodized aluminum steering center link
Anodized aluminum steering/top deck posts
Anodized aluminum servo mounts
Adjustable Ackermann, front toe in/out
Full ball bearings in steering system

MORE
Anodized aluminum front/rear body mounts
Aluminum threaded antenna mount
Racing slick tires with molded tire inserts
Aero-dish wheels
Pre-finished body, ready to race

To get up and running you will need:
6-cell NiCd/NiMH or 2S LiPo battery pack

Item# C24551BLUE
Barcode: 91789015369

You May Also Like

Featured Products